TIRE PRESSURE WARNING RECEIVER(for Sedan) INSTALLATION

PROCEDURE


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. Connect the connector to the tire pressure warning ECU and receiver.

    2. A002ZZC

      Engage the 2 hooks to temporarily install the tire pressure warning ECU and receiver.

    3. Install the bolt.

      Torque:
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

  2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

    Click here

  3. INSTALL REAR SEAT SIDE GARNISH RH

    Click here

  4. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

  5. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  6. INSTALL REAR SEATBACK ASSEMBLY RH

    Click here

  7. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

  8. INSTALL REAR SEAT HEADREST ASSEMBLY

  9. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  10. INSTALL SPARE WHEEL COVER

    Click here

  11. REGISTER TRANSMITTER ID

    Click here

  12. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  13. PERFORM INITIALIZATION

    Click here