FRONT STABILIZER BAR(for CVT) REMOVAL

PROCEDURE


  1. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

    Click here

  2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01LX2D

      Remove the nut and front stabilizer link assembly LH from the front shock absorber assembly.

      Note

      Do not damage the boot of the ball joint.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

  3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  4. REMOVE FRONT SUSPENSION MEMBER BRACE


    1. Type A:


      1. A01M2WB

        Remove the 4 bolts and front suspension member front brace LH from the front suspension crossmember sub-assembly.

      2. Remove the 4 bolts and front suspension member front brace RH from the front suspension crossmember sub-assembly.

    2. Type B:


      1. A01LYWJ

        Remove the 8 bolts and front suspension member brace from the front suspension crossmember sub-assembly.

  5. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

    Click here

  6. REMOVE FRONT STABILIZER BAR


    1. Remove the front stabilizer bar with 2 front stabilizer bar bushings from the front suspension crossmember sub-assembly.

  7. REMOVE FRONT STABILIZER BAR BUSHING LH


    1. A01M2R5

      Remove the front stabilizer bar bushing LH from the front stabilizer bar.

  8. REMOVE FRONT STABILIZER BAR BUSHING RH

    Tech Tips

    Perform the same procedure as the LH side.