FRONT STABILIZER BAR(for Multi-Mode Manual Transaxle) REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEELS

  2. REMOVE NO. 1 ENGINE UNDER COVER (for Full Cover Type)

  3. REMOVE CENTER NO. 4 ENGINE UNDER COVER

  4. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01M12WC01
      *A Upper Side
      *B Lower Side

      Remove the 2 nuts and front stabilizer link assembly LH.

      Note

      Do not damage the boot of the ball joint.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

  5. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  6. SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

    Click here

  7. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

    Click here

  8. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE LH


    1. A01M0GV

      Remove the 4 bolts and front suspension member front brace LH from the front suspension crossmember sub-assembly.

  9. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE RH

    Tech Tips

    Perform the same procedure as the LH side.

  10. REMOVE FRONT STABILIZER BAR


    1. A01LYV8

      Remove the front stabilizer bar with 2 front stabilizer bar bushings from the front suspension crossmember sub-assembly.

  11. REMOVE FRONT STABILIZER BAR BUSHING LH


    1. A01M2R5

      Remove the front stabilizer bar bushing LH from the front stabilizer bar.

  12. REMOVE FRONT STABILIZER BAR BUSHING RH

    Tech Tips

    Perform the same procedure as the LH side.