FRONT STABILIZER BAR(for Manual Transaxle) REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEELS

  2. REMOVE NO. 1 ENGINE UNDER COVER

  3. REMOVE CENTER NO. 4 ENGINE UNDER COVER (w/ Cover)

  4. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01M12WC01
      *A Upper Side
      *B Lower Side

      Remove the 2 nuts and front stabilizer link assembly LH.

      Note

      Do not damage the boot of the ball joint.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

  5. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  6. SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

    Click here

  7. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

    Click here

  8. REMOVE FRONT SUSPENSION MEMBER BRACE


    1. Type A:


      1. A01M0GV

        Remove the 4 bolts and front suspension member front brace LH from the front suspension crossmember sub-assembly.

      2. Remove the 4 bolts and front suspension member front brace RH from the front suspension crossmember sub-assembly.

    2. Type B:


      1. A01LV8I

        Remove the 8 bolts and front suspension member brace from the front suspension crossmember sub-assembly.

  9. REMOVE FRONT STABILIZER BAR


    1. A01LZT7

      Remove the front stabilizer bar with 2 front stabilizer bar bushings from the front suspension crossmember sub-assembly.

  10. REMOVE FRONT STABILIZER BAR BUSHING LH


    1. A01M2R5

      Remove the front stabilizer bar bushing LH from the front stabilizer bar.

  11. REMOVE FRONT STABILIZER BAR BUSHING RH

    Tech Tips

    Perform the same procedure as the LH side.