OIL PRESSURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH

  2. REMOVE NO. 1 ENGINE UNDER COVER (for 1ZR-FAE)

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER (for 8NR-FTS)

    Click here

  4. REMOVE REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

    Click here

  5. REMOVE REAR ENGINE UNDER COVER LH (for 8NR-FTS)

    Click here

  6. REMOVE OIL PRESSURE SENSOR


    1. A0030IV

      Disconnect the oil pressure sensor connector.

    2. A00319MN01

      Using SST, remove the oil pressure sensor from the rear transaxle case.

      SST
      09326-22011