REVOLUTION SENSOR INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT)

   
   

   1. Apply Toyota Genuine CVT Fluid FE to a new O-ring.

   2. Install the O-ring to the transmission revolution sensor (NOUT).

   3. Install the transmission revolution sensor (NOUT) to the rear transaxle case with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   4. Connect the transmission revolution sensor (NOUT) connector.

2. INSTALL TRANSMISSION REVOLUTION SENSOR (NIN)

   
   

   1. Apply Toyota Genuine CVT Fluid FE to a new O-ring.

   2. Install the O-ring to the transmission revolution sensor (NIN).

   3. Install the transmission revolution sensor (NIN) to the transaxle case with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   4. Connect the transmission revolution sensor (NIN) connector.

3. INSTALL REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

   Click here

4. INSTALL REAR ENGINE UNDER COVER LH (for 8NR-FTS)

   Click here

5. INSTALL NO. 1 ENGINE UNDER COVER (for 1ZR-FAE)

   
   

   • for Half Cover Type:

     Click here

   • for Metal Type:

     Click here

6. INSTALL NO. 1 ENGINE UNDER COVER (for 8NR-FTS)

   Click here

7. CHECK DATA LIST (for 1ZR-FAE)

   Click here

8. CHECK DATA LIST (for 8NR-FTS)

   Click here