| DTC Code | DTC Name |
|---|---|
| P175009 | Brake ECU Malfunction |
DESCRIPTION
This DTC is stored if the ECM receives a malfunction signal from the brake actuator assembly (skid control ECU).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P175009 | Brake ECU Malfunction | 1. Diagnosis Condition 2. Malfunction Status 3. Malfunction Time 4. Other
|
Vehicle stability control system | Comes on | DTC stored | SAE Code: P1750 |
CAUTION / NOTICE / HINT
Tech Tips
After performing repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
Turn the ignition switch to ON.
Check for DTCs again.
PROCEDURE
CHECK DTC OUTPUT (BRAKE CONTROL SYSTEM)
Check for brake control system DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
CHECK FOR INTERMITTENT PROBLEMS Click here |
| B |
|
GO TO VEHICLE STABILITY CONTROL SYSTEM Click here |