PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  3. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  4. REMOVE BATTERY

    Click here

  5. REMOVE BATTERY CARRIER ASSEMBLY

    Click here

  6. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A00Y9ET

      Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

    3. Remove the clip and separate the transmission control cable assembly from the No. 1 transmission control cable bracket.

  7. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A00Y7VM

      Remove the nut, washer and control shaft lever from the park/neutral position switch assembly.

    2. Disconnect the park/neutral position switch assembly connector.

    3. A00Y6KY

      Pry out the lock plate and remove the lock nut and the lock plate from the park/neutral position switch assembly.

    4. A00Y5YP

      Remove the 2 bolts and pull out the park/neutral position switch assembly from the continuously variable transaxle assembly.