OIL PRESSURE SENSOR REMOVAL

PROCEDURE

1. REMOVE FRONT WHEEL LH

2. REMOVE NO. 1 ENGINE UNDER COVER (for 1ZR-FE)

   Click here

3. REMOVE NO. 1 ENGINE UNDER COVER (for 2ZR-FE)

   Click here

4. REMOVE REAR ENGINE UNDER COVER LH (for 1ZR-FE)

   Click here

5. REMOVE REAR ENGINE UNDER COVER LH (for 2ZR-FE)

   Click here

6. REMOVE OIL PRESSURE SENSOR

   
   

   1. 

      Disconnect the oil pressure sensor connector.

   2. 

      Using SST, remove the oil pressure sensor from the continuously variable transaxle assembly.

      SST

      09326-22011