REVOLUTION SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER (for Half Cover Type)


  2. REMOVE NO. 1 ENGINE UNDER COVER (for Full Cover Type)

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER (for Metal Type)


  4. REMOVE REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

    Click here

  5. REMOVE REAR ENGINE UNDER COVER LH (for 1ZR-FE)

    Click here

  6. REMOVE REAR ENGINE UNDER COVER LH (for 2ZR-FE)

    Click here

  7. REMOVE TRANSMISSION REVOLUTION SENSOR (NIN)


    1. A012IGA

      Disconnect the transmission revolution sensor (NIN) connector.

    2. Remove the bolt and transmission revolution sensor (NIN) from the continuously variable transaxle assembly.

    3. Remove the O-ring from the transmission revolution sensor (NIN).

  8. REMOVE TRANSMISSION REVOLUTION SENSOR (NOUT)


    1. A012ME4

      Disconnect the transmission revolution sensor (NOUT) connector.

    2. Remove the bolt and transmission revolution sensor (NOUT) from the continuously variable transaxle assembly.

    3. Remove the O-ring from the transmission revolution sensor (NOUT).

  9. REMOVE TRANSMISSION REVOLUTION SENSOR (NT)


    1. A012LB5

      Disconnect the transmission revolution sensor (NT) connector.

    2. Remove the bolt and transmission revolution sensor (NT) from the continuously variable transaxle assembly.

    3. Remove the O-ring from the transmission revolution sensor (NT).