OIL PAN REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER (for Half Cover Type)


  2. REMOVE NO. 1 ENGINE UNDER COVER (for Metal Type)


  3. REMOVE REAR ENGINE UNDER COVER LH (for 1ZR-FE)

    Click here

  4. REMOVE REAR ENGINE UNDER COVER LH (for 2ZR-FE)

    Click here

  5. REMOVE TRANSAXLE OIL (CVT) PAN SUB-ASSEMBLY


    1. A01M3DO

      Remove the refill plug and gasket from the continuously variable transaxle assembly.

    2. A01LWFV

      Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the continuously variable transaxle assembly.

    3. A01LZA9C08
      *1 No. 1 Transmission Oil Filler Tube

      Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the transaxle oil (CVT) pan sub-assembly.

      Tech Tips

      Removing the No. 1 transmission oil filler tube will drain all oil in the transaxle oil (CVT) pan sub-assembly.

    4. A01LV4B

      Remove the 16 bolts, transaxle oil (CVT) pan sub-assembly and transaxle oil pan (CVT) gasket from the continuously variable transaxle assembly.

      Note

      Some fluid will remain in the transaxle oil (CVT) pan sub-assembly. Remove all the bolts, and carefully remove the transaxle oil (CVT) pan sub-assembly.

    5. Temporarily install the refill plug and gasket to the continuously variable transaxle assembly.

      Tech Tips

      Reuse the old gasket as the refill plug will be removed again to adjust the fluid level.

  6. REMOVE OIL CLEANER (CVT) MAGNET


    1. A01M1EWC05
      *1 Oil Cleaner (CVT) Magnet

      Remove the 3 oil cleaner (CVT) magnets from the transaxle oil (CVT) pan sub-assembly.

    2. Clean off any metal particles adhered to the 3 oil cleaner (CVT) magnets.

    3. Clean the transaxle oil (CVT) pan sub-assembly and remove any metal particles, sludge, etc.