SHIFT PADDLE SWITCH INSTALLATION

PROCEDURE


  1. INSTALL SHIFT PADDLE SWITCH


    1. Connect the 2 shift paddle switch connectors.

    2. A012KAFC07
      *a Band Clamp
      *b 0 to 40°
      *c 1 to 3 mm (0.0394 to 0.118 in.)
      *d Shift Paddle Switch Connector

      Install a new 2 band clamps as shown in the illustration.

    3. Engage the 3 clamps to install the No. 1 switch wire with the 2 shift paddle switches.

    4. Install the 2 shift paddle switches with the 2 screws.

      Torque:
      1.3 N*m  { 13 kgf*cm, 12 in.*lbf }

  2. INSTALL STEERING PAD SWITCH ASSEMBLY

    Click here

  3. INSTALL STEERING WHEEL ASSEMBLY

    Click here