MULTI-MODE MANUAL TRANSAXLE ECU(for LHD) REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

    Click here

  3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  4. REMOVE ECU INTEGRATION BOX RH


    1. Disconnect each connector.

    2. A01M0X4

      Remove the 3 bolts and ECU integration box RH.

  5. REMOVE TCM


    1. A01LX8U

      Remove the TCM from the ECU integration box RH.