SHIFT STROKE SENSOR REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  2. REMOVE FUEL FILTER ASSEMBLY

    Click here

  3. DISCONNECT ENGINE WIRE


    1. Disconnect the engine wire from the ECM.


      1. A01TBS4

        Raise the lever while pushing the lock on the lever, and disconnect the ECM connector.

      2. A01T8K3

        Disconnect the 2 engine wire connectors and 2 clamps.

  4. REMOVE FUEL FILTER SUPPORT

    Click here

  5. REMOVE AIR CLEANER BRACKET

    Click here

  6. REMOVE SHIFT STROKE SENSOR


    1. A01T9XG

      Disconnect the wire harness clamp.

    2. Disconnect the shift stroke sensor connector.

    3. A01TCQ6

      Remove the 2 screws and shift stroke sensor from the shift and select actuator.

    4. Remove the O-ring from the shift stroke sensor.