TRANSMISSION REVOLUTION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION REVOLUTION SENSOR


    1. Coat a new O-ring with MP grease.

    2. Install the O-ring to the transmission revolution sensor.

    3. A01TDLV

      Install the transmission revolution sensor with the bolt.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }
    4. A01TDSH

      Connect the transmission revolution sensor connector.

    5. Connect the wire harness clamp.

  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  4. INSTALL BATTERY

    Click here

  5. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here