MULTI-MODE MANUAL TRANSAXLE SYSTEM Pattern Select Switch Circuit

DESCRIPTION

While the vehicle is driven with the shift lever in E, the most appropriate gear is automatically selected according to the accelerator pedal opening angle and vehicle speed. During this time, shift control can be switched between easy (E) mode and easy sports (Es) mode by pressing the pattern select switch.

WIRING DIAGRAM

*1	Pattern Select Switch

PROCEDURE

1. INSPECT PATTERN SELECT SWITCH

   
   
   1. 

      *a	Component without harness connected (Pattern Select Switch)

      Remove the pattern select switch.

      Click here

   2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 11 - 8 Pattern select switch pressed continuously Below 1 Ω Pattern select switch released 10 kΩ or higher

      Result
      Proceed to OK NG

   
   

   NG

   REPLACE PATTERN SELECT SWITCH Click here

   OK

2. CHECK HARNESS AND CONNECTOR (PATTERN SELECT SWITCH - BODY GROUND)

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition E105-8 - Body ground Always Below 1 Ω

      Result
      Proceed to OK NG

   
   

   NG

   REPAIR OR REPLACE HARNESS OR CONNECTOR

   OK

3. CHECK HARNESS AND CONNECTOR (PATTERN SELECT SWITCH - TCM)

   
   

   1. Disconnect the TCM connector.

   2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition E104-23 (ESSW) - E105-11 Always Below 1 Ω E104-23 (ESSW) - Body ground Always 10 kΩ or higher

      Result
      Proceed to OK NG

   
   

   NG

   REPAIR OR REPLACE HARNESS OR CONNECTOR

   OK

4. REPLACE TCM

   
   

   1. Replace the TCM.

      for LHD: Click here

      for RHD: Click here

      Result
      Proceed to NEXT

   
   

   NEXT

5. PERFORM INITIALIZATION

   
   

   1. Perform the initialization and learning procedure.

      Click here

      Result
      Proceed to NEXT

   
   

   NEXT

   END