SHIFT LEVER ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL FLOOR SHIFT LEVER ASSEMBLY


    1. Install the floor shift lever assembly with the 4 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }
  2. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY


    1. B0042B4

      Engage the 2 claws to install the transmission control cable assembly to the floor shift lever assembly.

      Note

      Make sure that the claws are firmly engaged.

    2. Connect the transmission control shift cable to the floor shift lever assembly.

    3. Connect the transmission control select cable to the floor shift lever assembly with the clip.

      Note


      • Make sure the lock piece of the transmission control select cable length adjustment structure is facing upward when the transmission control select cable is connected.

      • Make sure that the transmission control select cable is securely installed.

    4. Engage the 4 clamps to connect the wire harness to the floor shift lever assembly.

  3. ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY

    Click here

  4. INSTALL REAR CONSOLE BOX ASSEMBLY (for Hatchback, Wagon)

    Click here

  5. INSTALL REAR CONSOLE BOX ASSEMBLY (for Sedan)

    Click here