SHIFT AND SELECT LEVER SHAFT DISASSEMBLY

PROCEDURE


  1. REMOVE INNER NO. 2 SHIFT LEVER


    1. A00Y9S2

      Using a 5 mm pin punch and a hammer, remove the slotted spring pin and inner No. 2 shift lever from the shift and select lever shaft.

      Tech Tips

      Check the orientation of the inner No. 2 shift lever.

  2. REMOVE RELEASE HEAD STRAIGHT PIN


    1. A00YA0M

      Using a 5 mm pin punch and a hammer, remove the slotted spring pin from the select stopper block.

    2. A00Y9EQ

      Using a 5 mm pin punch and a hammer, remove the slotted spring pin from the front inner shift lever.

    3. A00YADD

      Turn the release head clockwise.

    4. A00Y8X3

      Slide the select stopper block upwards and remove the release head straight pin from the front inner shift lever.

  3. REMOVE SELECT STOPPER BLOCK


    1. A00YAFL

      Remove the front inner shift lever, release head torsion spring, release head and select stopper block from the shift and select lever shaft.

      Tech Tips

      Check the orientation of the front inner shift lever, release head torsion spring, release head and select stopper block.