BACK-UP LIGHT SWITCH INSTALLATION

PROCEDURE


  1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY


    1. A01LV7PN01

      Using SST, install a new gasket and the back-up light switch assembly to the manual transaxle assembly.

      SST
      09817-16011
      Torque:
      40.2 N*m  { 410 kgf*cm, 30 ft.*lbf }

    2. Connect the back-up light switch assembly connector.

  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (w/ Glow Plug Controller)

    Click here

  3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (w/o Glow Plug Controller)

    Click here

  4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (w/ Glow Plug Controller)

    Click here

  5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (w/o Glow Plug Controller)

    Click here

  6. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)