BACK-UP LIGHT SWITCH INSTALLATION

PROCEDURE

1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY

   
   

   1. 

      Using SST, install a new gasket and the back-up light switch assembly to the manual transaxle assembly.

      SST

      09817-16011

      Torque:

      40.2 N*m  { 410 kgf*cm, 30 ft.*lbf }

   2. Connect the back-up light switch assembly connector.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (for 1ZR-FAE)

   Click here

3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (for 1ZR-FE)

   Click here

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (for 1ZR-FAE)

   Click here

5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (for 1ZR-FE)

   Click here

6. INSTALL NO. 2 CYLINDER HEAD COVER (for 1ZR-FAE)

   Click here

7. INSTALL NO. 2 CYLINDER HEAD COVER (for 1ZR-FE)

   Click here