BACK-UP LIGHT SWITCH REMOVAL

PROCEDURE

1. REMOVE NO. 2 CYLINDER HEAD COVER (for 1ZR-FAE)

   Click here

2. REMOVE NO. 2 CYLINDER HEAD COVER (for 1ZR-FE)

   Click here

3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (for 1ZR-FAE)

   Click here

4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (for 1ZR-FE)

   Click here

5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 1ZR-FAE)

   Click here

6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY (for 1ZR-FE)

   Click here

7. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY

   
   

   1. 

      Disconnect the back-up light switch assembly connector.

   2. 

      Using SST, remove the back-up light switch assembly and gasket from the manual transaxle assembly.

      SST

      09817-16011