INPUT SHAFT DISASSEMBLY

PROCEDURE


  1. REMOVE INPUT SHAFT REAR BEARING SHAFT SNAP RING


    1. A00Y636

      Using a snap ring expander, remove the input shaft rear bearing shaft snap ring from the input shaft.

  2. REMOVE INPUT SHAFT REAR RADIAL BALL BEARING


    1. A00YBCLN01

      Using SST, remove the input shaft rear radial ball bearing from the input shaft.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011 )
      09631-20031

  3. REMOVE 6TH DRIVE GEAR


    1. A00Y7KHN01

      Using SST and a press, remove the 6th drive gear from the input shaft.

      SST
      09950-00020

  4. REMOVE 3RD DRIVE GEAR


    1. A00Y8LCN01

      Using SST and a press, remove the 3rd drive gear from the input shaft.

      SST
      09950-00020
    2. A00Y9EU

      Remove the spacer from the input shaft.

  5. REMOVE 4TH DRIVE GEAR


    1. A00Y6A3N01

      Using SST and a press, remove the 4th drive gear from the input shaft.

      SST
      09950-00020

  6. REMOVE INPUT SHAFT SNAP RING


    1. A00YA9A

      Using 2 screwdrivers and a hammer, remove the input shaft snap ring from the input shaft.

  7. REMOVE INPUT SHAFT FRONT BEARING INNER RACE


    1. A00Y5KTN01

      Using SST and a press, remove the input shaft front bearing inner race from the input shaft.

      SST
      09950-00020