PARK / NEUTRAL POSITION SWITCH INSTALLATION

PROCEDURE

1. INSTALL NEUTRAL POSITION SWITCH

   
   

   1. 

      Using SST, install a new gasket and neutral position switch to the manual transaxle assembly.

      SST

      09817-16011

      Torque:

      40.2 N*m  { 410 kgf*cm, 30 ft.*lbf }

   2. Connect the neutral position switch connector.

2. INSTALL REAR ENGINE UNDER COVER LH

   Click here

3. INSTALL NO. 1 ENGINE UNDER COVER

   Click here