MANUAL TRANSAXLE OIL REPLACEMENT

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. DRAIN MANUAL TRANSAXLE OIL


    1. A01TBMU

      Remove the manual transmission filler plug and gasket.

    2. A01TCOR

      Remove the drain plug and gasket to drain the manual transaxle oil.

    3. Install a new gasket and the drain plug.

      Torque:
      39.2 N*m  { 400 kgf*cm, 29 ft.*lbf }

  3. ADD MANUAL TRANSAXLE OIL


    1. A01TBBMC02
      *a 0 to 5 mm (0 to 0.197 in.)

      Add manual transaxle oil until the oil level is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the manual transmission filler plug opening.

      Manual Transaxle Oil
      "Toyota Genuine Manual Transmission Gear Oil LV GL-4 and SAE 75W" or "API GL-4 and SAE 75W"
      Standard Capacity
      2.1 liters (2.2 US qts, 1.8 Imp. qts)
    2. A01TBMU

      Install a new gasket and the manual transmission filler plug.

      Torque:
      39.2 N*m  { 400 kgf*cm, 29 ft.*lbf }

      Note


      • When adding manual transaxle oil, make sure that the vehicle is level.

      • An excessively large or small amount of manual transaxle oil may cause problems.

      • After adding manual transaxle oil, drive the vehicle and recheck the oil level.

  4. INSPECT FOR OIL LEAK

  5. INSTALL NO. 1 ENGINE UNDER COVER

    Click here