CLUTCH STROKE SENSOR(for EC65A) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER (for Half Cover Type)

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER (for Full Cover Type)

    Click here

  3. REMOVE CLUTCH STROKE SENSOR


    1. B00441H

      Disconnect the connector from the clutch stroke sensor.

      Note

      Do not forcibly pull the connector as this may damage the wire harness.

    2. B00424D

      Remove the 2 screws and clutch stroke sensor from the clutch actuator housing sub-assembly.

    3. Remove the O-ring from the clutch stroke sensor.