CLUTCH MASTER CYLINDER REMOVAL

PROCEDURE


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

    Click here

  2. REMOVE BRAKE BOOSTER ASSEMBLY (for LHD)

    Click here

  3. DISCONNECT CLUTCH RESERVOIR TUBE


    1. Loosen the clip and disconnect the clutch reservoir tube from the clutch master cylinder assembly.

      Tech Tips

      Use a container to collect the fluid.

  4. DISCONNECT CLUTCH LINE

    A00YAJE

    1. Using a 10 mm union nut wrench, disconnect the clutch line.

      Tech Tips

      Use a container to collect the fluid.

  5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY (for LHD)


    1. A00Y866

      Remove the clip from the clutch master cylinder push rod clevis with hole pin.

    2. Remove the clutch master cylinder push rod clevis with hole pin and disconnect the clutch master cylinder push rod clevis from the clutch pedal sub-assembly.

    3. A00Y5BA

      Remove the 2 nuts and clutch master cylinder assembly from the body.

    4. Remove the clutch master cylinder bracket.

  6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY (for RHD)


    1. A00Y924

      Push the clutch master cylinder push rod clevis upward and release it toward the left side of the vehicle.

    2. Remove the 2 nuts and clutch master cylinder assembly from the body.

      A00Y8DQC01
      *A for 1NR-FE *B for 1ZR-FAE, 1ND-TV

    3. Remove the clutch master cylinder bracket.