CLUTCH MASTER CYLINDER REMOVAL

PROCEDURE


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)


  2. REMOVE BRAKE BOOSTER ASSEMBLY (for LHD)

    Click here

  3. DISCONNECT CLUTCH RESERVOIR TUBE


    1. Loosen the clip and disconnect the clutch reservoir tube from the clutch master cylinder assembly.

      Tech Tips

      Use a container to collect the fluid.

  4. DISCONNECT CLUTCH LINE

    A012GH8

    1. Using a 10 mm union nut wrench, disconnect the clutch line.

      Tech Tips

      Use a container to collect the fluid.

  5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY (for LHD)


    1. A012N1U

      Remove the clip from the clutch master cylinder push rod clevis with hole pin.

    2. Remove the clutch master cylinder push rod clevis with hole pin and disconnect the clutch master cylinder push rod clevis from the clutch pedal sub-assembly.

    3. A012IJY

      Remove the 2 nuts and clutch master cylinder assembly from the body.

    4. Remove the clutch master cylinder bracket.

  6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY (for RHD)


    1. A012LP5

      Push the clutch master cylinder push rod clevis upward and release it toward the left side of the vehicle.

    2. Remove the 2 nuts and clutch master cylinder assembly from the body.

      A012KD5C01
      *A for 1NR-FE *B for 1ZR-FAE, 1ND-TV

    3. Remove the clutch master cylinder bracket.