STOP AND START SYSTEM CANCEL SWITCH ASSEMBLY(for Hatchback, Wagon) INSPECTION

PROCEDURE


  1. INSPECT ECO RUN CANCEL SWITCH ASSEMBLY (COMBINATION SWITCH ASSEMBLY)


    1. A01M2AEC10
      *a

      Component without harness connected

      (Eco Run Cancel Switch Assembly (Combination Switch Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (ECU) - 3 (E) Pushed Below 50 Ω
      Not pushed 10 kΩ or higher

      If the result is not as specified, replace the eco run cancel switch assembly (combination switch assembly).