ENGINE STOP AND START ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click here

  2. READ NUMBER OF STARTER OPERATIONS

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

    Click here

  5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  6. REMOVE ECU INTEGRATION BOX RH (for LHD)

    Click here

  7. REMOVE ENGINE STOP AND START ECU (for LHD)

    A00Y5U3

    1. Disengage the 2 claws and remove the engine stop and start ECU from the ECU integration box RH.

  8. REMOVE ENGINE STOP AND START ECU (for RHD)


    1. A00Y4XB

      Disconnect the 3 engine stop and start ECU connectors from the engine stop and start ECU.

    2. A00Y80L

      Remove the 2 bolts and engine stop and start ECU.

    3. A00Y9AK

      Disengage the 3 claws and remove the bracket from the engine stop and start ECU.