CRUISE CONTROL SYSTEM(for 1ND-TV without Driving support ECU) ROAD TEST


  1. PROBLEM SYMPTOM CONFIRMATION


    1. A01LZ14C01
      *a ON-OFF
      *b -/SET

      Inspect the SET function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Check that the cruise control indicator illuminates in green on the combination meter assembly.

      3. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      4. Push the cruise control switch to -/SET.

      5. A01LWHZC22
        *a Cruise Control Indicator (Green)
        *b Cruise Control SET Indicator

        Check that the cruise control SET indicator illuminates at this time.

      6. After releasing the switch, check that the vehicle maintains the set speed.

    2. A01M3A7C01
      *a ON-OFF
      *b +/RES

      Inspect the + (ACCEL) function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. Check that vehicle speed increases while the cruise control switch is pushed to +/RES, and that the vehicle maintains the newly set speed when the switch is released.

      5. Push the cruise control switch to +/RES and then release it immediately. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (tap-up control).

    3. A01LZ14C02
      *a ON-OFF
      *b -/SET

      Inspect the - (COAST) function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. Check that vehicle speed decreases while the cruise control switch is pushed to -/SET, and the vehicle maintains the newly set speed when the switch is released.

      5. Push the cruise control switch to -/SET, and then release it immediately. Check that vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (tap-down control).

    4. A01LZK1C01
      *a ON-OFF
      *b CANCEL

      Inspect the CANCEL function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. When any of the following are performed, check that cruise control system control of vehicle speed is canceled and that the normal driving mode (no control of vehicle speed by the cruise control system) resumes.


        • Depressing the brake pedal.

        • The ECM cancels cruise control when the clutch pedal is depressed.

        • Pulling the cruise control switch to CANCEL.

        • Turning the cruise control system off using the cruise control switch (ON-OFF button).

    5. A01M3A7C01
      *a ON-OFF
      *b +/RES

      Inspect the RES (RESUME) function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. Cancel cruise control system control of vehicle speed by performing any of the above operations (other than turning the cruise control system off using the cruise control switch (ON-OFF button)).

      5. After pushing the cruise control switch to +/RES at a speed of more than 40 km/h (25 mph), check that the vehicle resumes the speed set prior to cancellation.