CRUISE CONTROL SYSTEM(for 1ND-TV with Driving support ECU) FAIL-SAFE CHART

Tech Tips

If the following conditions are detected while the cruise control system is controlling vehicle speed, the system clears the vehicle speed stored in the driving support ECU assembly and cancels cruise control system control of vehicle speed.

Vehicle Condition Auto Cancel Condition Re-operation Condition
Cruise control indicator goes out and a warning message is displayed

  • Open or short in stop light switch circuit

  • Problem with vehicle speed signal

 Cruise control system is turned off and back on again using the cruise control switch (ON-OFF button).

  • Problem with stop light switch input circuit

  • Problem with cruise control switch cancel circuit

 Ignition switch is turned off and back to ON again.
Cruise control indicator remains illuminated in green (Cruise control system control of vehicle speed is canceled)

  • Vehicle speed is lower than low speed limit (approximately 40 km/h (25 mph)) while driving with cruise control system controlling vehicle speed

  • VSC system operates while driving with cruise control system controlling vehicle speed

 Cruise control switch is pushed to +/RES
Vehicle speed is lower than stored speed by approximately 16 km/h (10 mph) or more Cruise control switch is pushed to -/SET
Cruise control indicator goes out Problem with throttle position sensor or motor Cruise control system is turned off and back on again using the cruise control switch (ON-OFF button).