CRUISE CONTROL SYSTEM(except 1ND-TV, 8NR-FTS) ROAD TEST


  1. PROBLEM SYMPTOM CONFIRMATION


    1. A01LZ14

      Inspect the SET function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Check that the cruise control indicator illuminates in green on the combination meter assembly.

      3. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      4. Push the cruise control switch to -/SET.

      5. A01LWHZC01
        *1 Cruise Control Indicator (Green)
        *2 Cruise Control SET Indicator

        Check that the cruise control SET indicator illuminates at this time.

      6. After releasing the switch, check that the vehicle maintains the set speed.

    2. A01M3A7

      Inspect the + (ACCEL) function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. Check that vehicle speed increases while the cruise control switch is pushed to +/RES, and that the vehicle maintains the newly set speed when the switch is released.

      5. Push the cruise control switch to +/RES and then release it immediately. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (tap-up control).

    3. A01LZ14

      Inspect the - (COAST) function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. Check that vehicle speed decreases while the cruise control switch is pushed to -/SET, and the vehicle maintains the newly set speed when the switch is released.

      5. Push the cruise control switch to -/SET, and then release it immediately. Check that vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (tap-down control).

    4. A01LZK1

      Inspect the CANCEL function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. When any of the following are performed, check that cruise control system control of vehicle speed is canceled and that the normal driving mode (no control of vehicle speed by the cruise control system) resumes.


        • Depressing the brake pedal.

        • for Manual Transaxle:

          The ECM cancels cruise control when the clutch pedal is depressed.

        • for CVT:

          Moving the shift lever from D or M to any other position.

        • for CVT:

          Selecting the 3rd, 2nd or 1st range with the shift lever in M.

        • for CVT:

          Selecting the 3rd, 2nd or 1st range using the shift paddle switch with the shift lever in D or M (w/ Shift Paddle Switch).

        • Pulling the cruise control switch to CANCEL.

        • Turning the cruise control system off using the cruise control switch (ON-OFF button).

    5. A01M3A7

      Inspect the RES (RESUME) function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. Cancel cruise control system control of vehicle speed by performing any of the above operations (other than turning the cruise control system off using the cruise control switch (ON-OFF button)).

      5. After pushing the cruise control switch to +/RES at a speed of more than 40 km/h (25 mph), check that the vehicle resumes the speed set prior to cancellation.