ENGINE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE SWITCH

   
   

   1. Engage the 2 claws to install the engine switch.

2. INSTALL NO.1 SWITCH HOLE BASE

   Click here

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

4. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

5. INSTALL LOWER NO.2 INSTRUMENT PANEL FINISH PANEL

   Click here

6. INSTALL NO.1 METER HOOD CLUSTER

   Click here

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here