ENGINE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE SWITCH

   
   

   1. Engage the 2 claws to install the engine switch.

2. INSTALL NO. 1 SWITCH HOLE BASE

   Click here

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

6. INSTALL NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY

   Click here

7. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here