ENGINE SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  8. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  9. REMOVE ENGINE SWITCH


    1. A01LWH3

      Disengage the 2 claws and remove the engine switch.