ENGINE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE SWITCH (for LHD)

   
   

   1. Engage the 2 claws to install the engine switch.

2. INSTALL NO. 1 SWITCH HOLE BASE (for LHD)

   Click here

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for LHD)

   Click here

4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for LHD)

   Click here

5. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

   Click here

6. INSTALL NO. 1 METER HOOD CLUSTER (for LHD)

   Click here

7. INSTALL ENGINE SWITCH (for RHD)

   
   

   1. Engage the 2 claws to install the engine switch.

8. INSTALL NO. 2 SWITCH HOLE BASE (for RHD)

   Click here

9. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

   Click here

10. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for RHD)

    Click here

11. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

    Click here

12. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

    Click here

13. INSTALL NO. 1 METER HOOD CLUSTER (for RHD)

    Click here

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here