STARTER(w/o Stop And Start System) COMPONENTS
ILLUSTRATION
| *A | for Half Cover Type | *B | for Full Cover Type |
| *1 | FLYWHEEL HOUSING SIDE COVER | *2 | NO. 1 ENGINE UNDER COVER |
| *3 | STARTER ASSEMBLY | *4 | TERMINAL CAP PROTECTOR |
| *5 | TERMINAL CAP | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | MAGNET STARTER SWITCH ASSEMBLY | *2 | PLANET CARRIER SHAFT SUB-ASSEMBLY |
| *3 | STARTER ARMATURE ASSEMBLY | *4 | STARTER BRUSH HOLDER ASSEMBLY |
| *5 | STARTER CLUTCH SUB-ASSEMBLY | *6 | STARTER YOKE ASSEMBLY |
| *7 | STARTER COMMUTATOR END FRAME | *8 | STARTER COMMUTATOR END FRAME COVER |
| *9 | WASHER | *10 | SLOTTED WASHER |
| *11 | PLANETARY GEAR | *12 | PLATE |
| *13 | PINION DRIVE LEVER | *14 | STARTER DRIVE HOUSING ASSEMBLY |
| *15 | SNAP RING | *16 | PINION STOP COLLAR |
| *17 | PLANET CARRIER | *18 | STARTER DRIVE HOUSING COVER |
| *19 | PLUNGER | *20 | RETURN SPRING |
| *21 | MAGNET SWITCH | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
High-temperature grease | - | - |