BATTERY CURRENT SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. REMOVE BATTERY CURRENT SENSOR ASSEMBLY


    1. B0043MF

      Disconnect the battery current sensor assembly connector.

    2. Remove the nut and disconnect the battery current sensor assembly from the negative (-) battery terminal.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

    3. B0041LV

      Remove the battery current sensor assembly from the engine wire.