ULTRASONIC SENSOR(for Wagon Rear Side) INSTALLATION

PROCEDURE

1. INSTALL NO. 4 ULTRASONIC SENSOR RETAINER

   
   
   1. 

      *a	Protrusion
      *b	Cutout

      Install the No. 4ultrasonic sensor retainer to the rear bumper assembly.

      Note

      
      

      • Do not damage the rear bumper assembly with the protrusion when installing the No. 4ultrasonic sensor retainer.

      • Securely install the No. 4ultrasonic sensor retainer so that there are no gaps between the No. 4ultrasonic sensor retainer and surface of the rear bumper assembly.

      Tech Tips

      
      

      • When installing the No. 4ultrasonic sensor retainer, align the cutout and protrusion as shown in the illustration.

      
      

      • Use the same procedure for all No. 4ultrasonic sensor retainers.

2. INSTALL ULTRASONIC SENSOR CLIP

   Tech Tips

   Use the same procedure for all ultrasonic sensor clips.

   
   

   1. Engage the 2 claws to install the ultrasonic sensor clip.

3. INSTALL NO. 4 ULTRASONIC SENSOR

   Tech Tips

   Use the same procedure for all No. 4 ultrasonic sensors.

   
   

   1. Engage the 2 claws to install the No. 4 ultrasonic sensor.

   2. Connect the connector.

   3. except LH Side:

      
      

      1. Engage the clamp.

4. INSTALL REAR BUMPER ASSEMBLY

   Click here