CLEARANCE WARNING ECU(for Sedan) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  5. REMOVE ECU INTEGRATION BOX RH

    Click here

  6. REMOVE CLEARANCE WARNING ECU ASSEMBLY


    1. B0043CP

      Disengage the 2 claws and remove the clearance warning ECU assembly.