REAR VIEW MONITOR SYSTEM(except Sedan) HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips

Use the following procedure to troubleshoot the rear view monitor system.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT

  2. INSPECT BATTERY VOLTAGE


    1. Measure the battery voltage.

      Standard Voltage
      11 to 14 V

      Tech Tips

      If the voltage is below 11 V, replace or recharge the battery before proceeding to the next step.

      Result
      Proceed to
      NEXT

    NEXT

  3. PROBLEM SYMPTOM CONFIRMATION

    Result
    Result Proceed to
    Symptom does not occur A
    Symptom occurs B

    B

    GO TO STEP 5 Click here

    A

  4. SYMPTOM SIMULATION

    Result
    Proceed to
    NEXT

    NEXT

  5. CHECK IF SAME SYMPTOM APPEARS IN OTHER SYSTEM


    1. Refer to the audio and visual system (for Radio and Display Type).*1

      Click here

    2. Refer to the navigation system.*2

      Click here


      • *1: w/o Navigation System

      • *2: w/ Navigation System

      Result
      Result Proceed to
      Symptom does not appear A
      Symptom appears (w/o Navigation System) B
      Symptom appears (w/ Navigation System) C

    B

    GO TO AUDIO AND VISUAL SYSTEM (for Radio and Display Type) Click here

    C

    GO TO NAVIGATION SYSTEM Click here

    A

  6. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table.

      Click here

      Result
      Result Proceed to
      Fault is not listed in Problem Symptoms Table A
      Fault is listed in Problem Symptoms Table B

    B

    GO TO STEP 8 Click here

    A

  7. PERFORM TROUBLESHOOTING BASED ON MALFUNCTION SYMPTOM


    1. Terminals of ECU.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  8. ADJUST, REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

    NEXT

  9. CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT

    END