DOOR CONTROL RECEIVER(for Wagon) REMOVAL

PROCEDURE


  1. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click here

  2. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here

  3. REMOVE FRONT DECK FLOOR BOX (w/ Deck Board)

    Click here

  4. REMOVE REAR FLOOR MAT ASSEMBLY

    Click here

  5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click here

  6. REMOVE DECK FLOOR BOX LH

    w/o Woofer:

    Click here

  7. REMOVE TONNEAU COVER ASSEMBLY

    Click here

  8. REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    Click here

  9. REMOVE REAR DECK TRIM COVER

    Click here

  10. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

  11. REMOVE REAR SEAT HEADREST ASSEMBLY

  12. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    Click here

  13. REMOVE REAR SEATBACK ASSEMBLY LH

    Click here

  14. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  15. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  16. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

    Click here

  17. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

  18. REMOVE NO. 2 DECK SIDE TRIM HOOK

    Click here

  19. REMOVE RECLINING REMOTE CONTROL BEZEL LH

    Click here

  20. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  21. REMOVE DOOR CONTROL RECEIVER


    1. A01M2WX

      Disconnect the connector.

    2. Remove the bolt.

    3. Disengage the 2 guides to remove the door control receiver.