DOOR CONTROL RECEIVER(for Sedan) INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER

   
   

   1. Engage the 2 guides to temporarily install the door control receiver.

   2. Install the door control receiver with the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   3. Connect the connector.

2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

   Click here

3. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

4. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for LH Side)

   Click here

5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

   Click here

6. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

7. INSTALL REAR SEATBACK ASSEMBLY LH

   Click here

8. INSTALL REAR SEAT HEADREST ASSEMBLY

9. INSTALL REAR SEAT CUSHION ASSEMBLY

   Click here

10. INSTALL SPARE WHEEL COVER

    Click here