EGR VALVE REMOVAL

PROCEDURE


  1. REMOVE INTAKE MANIFOLD

    Click here

  2. REMOVE EGR VALVE ASSEMBLY


    1. A012GFN

      Disconnect the water hose and connector from the EGR valve assembly.

    2. Slide the clip and disconnect the water hose from the EGR valve assembly.

    3. Remove the 2 nuts, bolt and EGR valve assembly.

    4. Remove the EGR valve gasket from the cylinder head sub-assembly.

  3. REMOVE STUD BOLT

    Tech Tips

    If a stud bolt is deformed or the threads are damaged, replace it.


    1. A012LB2

      Using an E8 "TORX" wrench, remove the 2 stud bolts.