EXHAUST GAS TEMPERATURE SENSOR(w/o Glow Plug Controller) REMOVAL

PROCEDURE


  1. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

    Click here

  2. REMOVE EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the exhaust gas temperature sensor is dropped, replace it with a new one.


    1. A01LZGL

      Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.

  3. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the No. 2 exhaust gas temperature sensor is dropped, replace it with a new one.


    1. A01M3ET

      Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.