FUEL PUMP REASSEMBLY

PROCEDURE

1. INSTALL FUEL PUMP

   Tech Tips

   Perform "Inspection After Repair" after replacing the fuel pump.

   Click here

   
   

   1. 

      *1	O-ring
      *2	Fuel Pump Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.

   2. Connect the fuel pump harness connector.

   3. Engage the 5 claws of the fuel pump.

      Note

      
      

      • Do not remove the suction filter.

      • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

   4. Engage the 2 claws of the No. 1 fuel suction support.

   5. Engage the 2 claws of the No. 1 fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

   6. 

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and connect the fuel pump filter hose.

      Note

      Do not apply excessive force to the fuel tube or the No. 1 fuel suction support.

   7. Connect the fuel pump harness connector.

2. INSTALL FUEL SENDER GAUGE ASSEMBLY

   Click here