FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. Check that the float moves smoothly between F and E.

    2. A01TCMOC01
      *a

      Component without harness connected

      (Fuel Sender Gauge Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Float Level Specified Condition
      1 - 2 F 13.5 to 16.5 Ω
      Between F and E 13.5 to 414.5 Ω (Gradually changes)
      E 405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.