FUEL SENDER GAUGE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A002ZSO

      Disconnect the 3 harness clamps.

      Note

      Do not damage the wire harness.

    2. A0030CM

      Remove the harness protector from the wire harness.

      Note

      Do not damage the wire harness.

    3. A0030H9

      Disconnect the fuel sender gauge assembly connector.

    4. A002ZTX

      Release the lock as shown in the illustration and slide the fuel sender gauge assembly to remove it.