FUEL PUMP ECU(for Hatchback) INSTALLATION

PROCEDURE

1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY

   
   

   1. Connect the connector to the fuel pump control ECU assembly.

   2. Install the fuel pump control ECU assembly with the 2 nuts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

   Click here

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

4. INSTALL LOWER DECK TRIM SIDE BOARD LH (w/ Deck Board)

   Click here

5. INSTALL NO. 2 DECK SIDE TRIM HOOK

   Click here

6. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

7. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

   Click here

8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

   Click here

9. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

10. INSTALL REAR SEAT ASSEMBLY

    Click here

11. INSTALL REAR DECK TRIM COVER

    Click here

12. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here

13. INSTALL DECK FLOOR BOX LH (w/ Deck Floor Box)

    Click here

14. INSTALL REAR DECK FLOOR BOX (w/ Deck Floor Box)

    Click here

15. INSTALL REAR FLOOR MAT ASSEMBLY

    Click here

16. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here

17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here