FUEL PUMP ECU(for Sedan) INSTALLATION

PROCEDURE

1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY

   
   

   1. Install the fuel pump control ECU assembly with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the fuel pump control ECU assembly connector.

   3. Install the luggage compartment trim cover assembly LH with the 3 clips.

2. INSTALL REAR FLOOR FINISH PLATE

   Click here

3. INSTALL SPARE WHEEL COVER

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here